The Project Gutenberg EBook of Delco Manuals: Radio Model 633, Delcotron Generator, by Delco-Remy Division This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org Title: Delco Manuals: Radio Model 633, Delcotron Generator Delco Radio Owner's Manual Model 633, Delcotron Generator Installation Author: Delco-Remy Division Release Date: February 26, 2010 [EBook #31407] Language: English Character set encoding: ISO-8859-1 *** START OF THIS PROJECT GUTENBERG EBOOK DELCO MANUALS *** Produced by Gerard Arthus, Meredith Bach, and the Online Distributed Proofreading Team at https://www.pgdp.net [Transcriber's Note: This ebook contains two manuals by Delco: Delco Radio Owner's Manual Model 633 and Delcotron Generator Installation. They are separated by a divider. In the list on pages 10 and 11 of Delco Radio Owner's Manual Model 633, the second station line for Tulsa (which is CFRB 690) has been removed, as it is believed to be an accidental reprinting of the following station line. Redundant headers and (foot)notes on these pages have also been removed.] DELCO RADIO OWNER'S MANUAL MODEL 633 INSTALLATION AND OPERATING INSTRUCTIONS This model of the Delco Radio is a six-tube super-heterodyne receiver designed for operation with a HEADER type speaker. It comprises the best in automotive radio engineering, featuring Syncro-Tuning--the newest, most efficient antenna circuit yet developed, and Sensitivity Control. The speaker and remote control unit are supplied in separate packages and are available in a wide variety of types and styles, depending upon the make and model of car the unit is to be used on. The package contains: _Part No._ 1 Receiver Unit, complete with tubes 1 Speaker Unit (less Adapter) 1210934 1 Combined Drilling Template and Radio--Dash Spacer 2 Chassis Mounting studs, 1/4--20 x 2-1/2 1207562 2 Chassis Mounting Shakeproof Washers 1208565 2 Chassis Mounting Nuts, 1/4--20 120375 1 Antenna Lead 1209622 1 Distributor Suppressor 1207818 1 Generator Condenser 1849014 1 Ammeter Condenser 1209333 INSTALLATION =Antenna--= See Instructions in antenna package. =Chassis--= This receiver may be installed on any car with Positive or Negative ground without any changes of wiring. When possible, locate the chassis on the driver's side of the dash, over the steering column, with the removable cover plate facing the floor. This position places the control shafts on the end of the case facing the center of the car. Locate the position of the mounting holes by means of the template included in the package. Drill the holes, using a 3/8" drill, and scrape the paint from around the holes on the engine side of the dash to insure a good ground connection as there is no other ground connection for this receiver. Make sure that all tubes and the vibrator are pushed well down in their sockets and that all the grid clips are properly in place on the top caps of their respective tubes. If a six-volt storage battery is available, check the receiver for normal operation before permanently installing it on the car. The antenna lead and control unit may be temporarily connected for this test. Insert the two receiver mounting studs in the back of the receiver case with the "burred" threads nearest the receiver to make sure that these studs do not enter the case far enough to cause damage to the receiver parts. Install the receiver, using the drilling template as a spacer between the dash and the receiver case. Install the two shakeproof washers over the chassis mounting studs. Then tighten the mounting nuts to insure that the receiver case shall be thoroughly grounded to the dash. =Antenna Lead--= Attach the black antenna lead to the car antenna and plug the connector on the antenna lead into the receiver chassis as shown in the Installation Diagrams. Ground the pigtail of the antenna lead shield to a convenient body bolt. Keep antenna lead out of engine compartment to avoid possibility of ignition interference being picked up by the lead-in. =Speaker--= See Instructions in speaker package. =Remote Control Unit--= See Instructions in remote control package. CONTROL UNIT ADJUSTMENT The volume control and station selector shafts are AUTOMATICALLY adjusted as follows: 1. Insert control cables in their respective bushings on the case (volume control is upper bushing when receiver is installed in the car), until they seat themselves and then tighten the set screws. 2. Turn the station selector knob to the right (clockwise) until it stops--then turn the knob counter-clockwise until it stops. The dial is now logged. 3. Turn the volume control knob clockwise until the knob turns hard. The volume control is now on full. =Eliminating Motor Interference--= Connect the ammeter condenser to the spring clip at the end of the wire containing the fuse holder by means of the self-threading screw on the side of the spring clip. Ground the other terminal of the condenser at any convenient point. Install the generator condenser on the generator side of the generator cut-out as shown in the Diagram of Connections. DO NOT connect the flexible lead to the field terminal of the generator. Remove the center distributor lead and insert the distributor suppressor in its place. Then plug the distributor lead into the suppressor. =Adjusting Delco Syncro-Tuning--= Turn the receiver on. Tune-in a radio station which logs between 55 and 65 on the dial and gives the radio a signal BARELY AUDIBLE in the speaker WITH the VOLUME control FULL ON. A small snap button cap is located in the end of the receiver case beside the antenna lead connection. Remove the snap button cap by prying with a small screw driver. By means of a small screw driver inserted in the hole which was covered by the small cap, adjust the Delco Syncro-Tuning condenser unit for maximum output in the speaker. Remaining on same station, readjust station selector for maximum volume and readjust the Delco Syncro-Tuning Condenser unit for maximum output. No further adjustment of this unit will be necessary as the receiver is now adjusted for best operation with your car antenna. Replace the snap button cap. OPERATION =To Turn On Receiver--= Some control units have a small knob located below the center of the dial. If your receiver is equipped with this type of control push this small knob in as far as it will go. Other control units have a combination on-off switch and volume control knob. To turn on this type of control turn the knob clockwise until the switch clicks and the dial is illuminated. =Volume Control--= Turning the volume control knob toward the right increases the output of the receiver and turning it toward the left reduces the output. =How To Tune The Receiver--= Turn the volume control knob approximately half way to the right. Rotate the station selector knob slowly until a station is heard. Tune this station in until the minimum amount of background noise is heard. Increase or decrease the volume to the desired level by adjusting the volume control knob. Careful tuning will result in better tone quality from all stations. If the program being received is from a powerful local station local interference may be practically eliminated by turning the sensitivity control to the LOCAL position. You then will get the best possible reproduction of that station's program. [Illustration: =INSTALLATION DIAGRAMS= GROUND TO DASH CASE SPACER AND DRILLING TEMPLATE DASH AMMETER CLIP AMMETER CONDENSER NO. 1209333 ANTENNA LEAD (BLACK) VOLUME CONTROL BUSHING FUSE TO COIL REMOVE SNAP BUTTON CAP TO ADJUST ANTENNA COMPENSATING CONDENSER STATION SELECTOR BUSHING DISTRIBUTOR SUPPRESSOR NO. 1207818 GROUND TO CAR POWER LEAD SENSITIVITY CONTROL TONE CONTROL ARMATURE TERMINAL DO NOT CONNECT TO FIELD TERMINAL VOLUME CONTROL STATION SELECTOR GENERATOR CONDENSER 1849014 SUGGESTED GENERATOR CONDENSER CONNECTIONS ON-OFF SWITCH] =Sensitivity Control--= The sensitivity control is located on the lower, left front corner of the receiver case and when turned to the LOCAL position it decreases the sensitivity of the receiver sufficiently to greatly reduce interference from street cars, electric signs, X-Ray machines, electrical machinery, power lines, etc. It will also eliminate interference from weak stations. When the control is turned to the DISTANCE position the receiver is allowed to operate at maximum sensitivity. =Tone Control--= The tone control is located on the lower, right front corner of the receiver case. This control is to be adjusted at the operator's will. However, most experienced operators prefer to set it for maximum treble response when the car is operated at high speeds. =To Turn Off The Receiver--= If the control head has a key knob in the center pull the knob out until it clicks into the off position and the receiver ceases to operate. If you wish to lock the receiver, pull the knob all the way out of the control unit and carry it with you. If you are using the type of control unit which has a combination on-off switch and volume control knob turn the knob to the left until the receiver ceases to operate. SERVICE Should your receiver fail to operate, first check the fuse located in the fuse holder in the ammeter cable. If you wish to remove your tubes and vibrator for test purposes, their location is indicated below. [Illustration: _Tube Complement_ 2 Type 6D6 1 Type 6A7 1 Type 6B7 1 Type 6B5 1 Type 84] Any further service work on your receiver should be referred to a competent radio service station. When at home call your local DEALER................................. AT..................................... TELEPHONE.............................. DATE RADIO INSTALLED................... PRINCIPAL BROADCAST STATIONS[A] ARRANGED ALPHABETICALLY BY CITIES =Abilene, Kans.= KFBI 1050 =Albuquerque, N. M.= KOB 1180 =Alexandria, Va.= WJSV 1460 =Amarillo, Tex.= KGRS 1410 WDAG 1410 =Ames, Iowa= WOI 640 =Asheville, N. C.= WWNC 570 =Atlanta, Ga.= WSB 740 =Atlantic City, N. J.= WPG 1100 =Baltimore, Md.= WBAL 1060 =Belle Plaine (Moose Jaw), Sask.= CJRM 540 =Billings, Mont.= KGHL 950 =Birmingham, Ala.= WAPI 1140 =Bismarck, N. D.= KFYR 550 =Boise, Idaho= KIDO 1350 =Boston, Mass.= WBZ 990 WBZA 990 WEEI 590 WHDH 830 WNAC 1230 =Brookings, S. D.= KFDY 550 =Brooklyn, N. Y.= WBBR 1300 =Buffalo, N. Y.= WBEN 900 WGR 550 WKWB 1480 =Chattanooga, Tenn.= WDOD 1280 =Chicago, Ill.= WBBM 770 WCFL 970 WENR 870 WGN 720 WJJD 1130 WLS 870 WMAQ 670 WMBI 1080 KYW 1020 =Charlotte, N. C.= WBT 1080 =Cincinnati, Ohio= WLW 700 =Clay Center, Nebr.= KMMJ 740 =Cleveland, Ohio= WHK 1390 WTAM 1070 =Colorado Springs, Col.= KVOR 1270 =Council Bluffs, Ia.= KOIL 1260 =Covington, Ky.= WCKY 1490 =Dallas, Tex.= KRLD 1040 WFAA 800 =Denver, Colo.= KLZ 560 KOA 830 =Des Moines, Ia.= WOC 1000 =Detroit, Mich.= WWJ 920 WJR 750 WXYZ 1240 =Eau Claire, Wis.= WTAQ 1330 =Edmonton, Alta.= CJCA 730 =Elmira, N. Y.= WESG 1040 =Fargo, N. D.= WDAY 940 =Fayetteville, Ark.= KUOA 1260 =Fort Wayne, Ind.= WOWO 1160 =Fort Worth, Tex.= KTAT 1240 WBAP 800 =Gainesville, Fla.= WRUF 830 =Gary, Ind.= WIND 560 =Great Falls, Mont.= KFBB 1280 =Harrisburg, Pa.= WBAK 1430 =Hartford, Conn.= WDRC 1330 WTIC 1060 =Havana, Cuba= CMCQ 780 CMK 730 CMW 590 CMX 890 =Hollywood, Cal.= KFWB 950 =Honolulu, Hawaii= KGU 750 =Hot Springs National Park, Ark.= KTHS 1040 =Houston, Tex.= KPRC 920 =Indianapolis, Ind.= WFBM 1230 =Jackson, Miss.= WJDX 1270 =Jacksonville, Fla.= WJAX 900 =Kalamazoo, Mich.= WKZO 590 =Kansas City, Mo.= KMBC 950 WDAF 610 WOQ 1300 =Knoxville, Tenn.= WNOX 560 =La Crosse, Wis.= WKBH 1380 =La Prairie (Montreal), Que.= CRCM 910 =Lawrence, Kans.= WREN 1220 =Lansing, Mich.= WKAR 1040 =Lincoln, Nebr.= KFAB 770 =Little Rock, Ark.= KLRA 1390 =Long Beach, Cal.= KFOX 1250 KGER 1360 =Los Angeles, Cal.= KECA 1430 KFAC 1300 KFI 640 KHJ 900 KNX 1050 =Louisville, Ky.= WAVE 940 WHAS 820 =Lulu Island (Vancouver Island), B. C.= CRCV 1100 =Madison, Wis.= WHA 940 =Mexico City, Mexico= XEB 1030 XEN 711 XEW 910 XFG 638 XFI 818 XEFO 940 XETR 610 =Miami Beach, Fla.= WMBF 1300 =Miami, Fla.= WIOD 1300 WQAM 560 =Milwaukee, Wis.= WTMJ 620 =Minneapolis, Minn.= WCCO 810 WDGY 1180 WLB 1250 WRHM 1250 =Montreal, Que.= CKAC 730 =Nashville, Tenn.= WLAC 1470 WSM 650 =Newark, N. J.= WAAM 1250 WNEW 1250 WOR 710 =New Orleans, La.= WDSU 1250 WWL 850 =New York, N. Y.= WABC 860 WEAF 660 WFAB 1300 WJZ 760 WLWL 1100 WOV 1130 =Norfolk, Nebr.= WJAG 1060 =Northfield, Minn.= WCAL 1250 =Oakland, Cal.= KLX 880 =Oklahoma, Okla.= WKY 900 KOMA 1480 =Omaha, Nebr.= WOW 590 =Ottawa, Ont.= CRCO 880 =Philadelphia, Pa.= WCAU 1170 =Piedras Negras, Coahuila= XEPN 585 =Pittsburgh, Pa.= KDKA 980 WCAE 1220 WJAS 1290 =Portland, Me.= WCSH 940 =Portland, Ore.= KEX 1180 KGW 620 KOIN 940 =Pullman, Wash.= KWSC 1220 =Raleigh, N. C.= WFTF 680 =Reading, Pa.= WEEU 830 =Reynosa, Tamaulipas= XEAW 956 =Richmond, Va.= WRVA 1110 =Rochester, N. Y.= WHAM 1150 =Salt Lake City, Utah= KDYL 1290 KSL 1130 =San Antonio, Tex.= KTSA 1290 WOAI 1190 =San Diego, Cal.= KFSD 600 KGB 1330 =San Francisco, Cal.= KFRC 610 KGO 790 KPO 680 KTAB 560 KYA 1230 =San Juan, Puerto Rico= WKAQ 1240 =Schenectady, N. Y.= WGY 790 =Seattle, Wash.= KJR 970 KOL 1270 KOMO 920 KTW 1220 =Shreveport, La.= KTBS 1450 KWKH 850 =Sioux City, Iowa= KSCJ 1330 =Sioux Falls, S. D.= KSOO 1110 =Spokane, Wash.= KFPY 1340 KGA 1470 KHQ 590 =Stevens Point, Wis.= WLBL 900 =St. Joseph, Mo.= KFEQ 680 =St. Louis, Mo.= KMOX 1090 KWK 1350 WEW 760 =St. Paul, Minn.= KSTP 1460 =Strathmore (Calgary), Alta.= CFCN 1030 =Superior, Wis.= WEBC 1290 =Syracuse, N. Y.= WFBL 1360 =Tallmadge, Ohio= WADC 1320 =Tampa, Fla.= WDAE 1220 =Toledo, Ohio= WSPD 1340 =Topeka, Kans.= WIBW 580 =Toronto, Ont.= CRCT 960 =Tulsa, Okla.= KVOO 1140 =Twp. of Kingston (Toronto), Ont.= CFRB 690 =Villa Acuna, Coahuila= XER 735 =Wheeling, W. Va.= WWVA 1160 =Wichita, Kans.= KFH 1300 =Windsor, Ont.= CKLW 840 =Winnipeg, Man.= CKY 910 =Yankton, S. D.= WNAX 570 =York, Pa.= WORK 1000 =Zion, Ill.= WCBD 1080 [A] Stations listed include only those of 1000 watts power (or higher). NOTE: Numbers following call letters indicate approximate dial setting. WARRANTY (_This Warranty not applicable outside U.S.A._) Your Delco Radio Carries the Same Guarantee As Your Car "The manufacturer warrants each new radio receiving set manufactured by it to be free from defects in material and workmanship under normal use and service, its obligation under this warranty being limited to making good at its factory or designated Branches any part or parts thereof which shall within ninety (90) days or 4,000 miles whichever expires first, after installation of such auto radio receiving set for the original purchaser, be returned to it with transportation charges prepaid and which its examination shall disclose to its satisfaction to have been thus defective; this warranty being expressly in lieu of all other warranties expressed or implied and of all other obligations or liabilities on its part, and the manufacturer neither assumes nor authorizes any other person to assume for it any other liability in connection with the sale of its products." "This warranty shall not apply to any radio receiving set which shall have been repaired or altered outside manufacturer's authorized Service Stations in any way so as in the judgment of the manufacturer to affect its stability, or on parts not made or authorized by the manufacturer have been used for replacement or other purposes, nor which has been subject to misuse, negligence, or accident." UNITED MOTORS SERVICE, INC. DETROIT, MICH. Form No. 2095 Printed in U. S. A. =========================================================================== =========================================================================== Delco Rebuilt 1 55-D Delcotron Generator 1845985 Rebuilt by Delco-Remy. Division of General Motors, Anderson, Indiana, 46011 Made in U.S.A. 275829 Printed in U.S.A. 12-17-71 DR-7086 INSTALLING SERVICE DELCOTRON® GENERATOR 1. DISCONNECT GROUNDED CABLE FROM BATTERY. 2. If it is necessary to rotate the slip ring end frame to match the unit being replaced, remove the thru bolts, separate frames just far enough to rotate to desired position and replace thru bolts. CAUTION: Separating the end frame too far causes the brushes to drop on to the greased shaft. If this happens, remove end frame completely, clean brushes with clean cloth, reassemble springs and brushes retaining them in position with a pin (toothpick). Remove pin after frames are reassembled. WHEN INSTALLING DELCOTRON® GENERATOR WITH INTEGRAL REGULATOR, THE SLIP RING END FRAME MOUNTING BRACKET IS NOT NEEDED. 3. When reusing the original fan, pulley and collar, tighten shaft nut to 40 to 60 lb. ft. If torque wrench is not available, insert a 5/16" hex wrench in end of shaft and tighten nut until the spring washer is just flattened. 4. Install Delcotron® Generator and check belt tension, mounting bolt tightness and make sure all electrical connections are clean and secure. IMPORTANT: Never operate the Delcotron® Generator without being connected to the battery. Never attempt to polarize the Delcotron® Generator. DELCO-REMY Division of General Motors Anderson, Indiana BPI End of the Project Gutenberg EBook of Delco Manuals: Radio Model 633, Delcotron Generator, by Delco-Remy Division *** END OF THIS PROJECT GUTENBERG EBOOK DELCO MANUALS *** ***** This file should be named 31407-8.txt or 31407-8.zip ***** This and all associated files of various formats will be found in: https://www.gutenberg.org/3/1/4/0/31407/ Produced by Gerard Arthus, Meredith Bach, and the Online Distributed Proofreading Team at https://www.pgdp.net Updated editions will replace the previous one--the old editions will be renamed. Creating the works from public domain print editions means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for the eBooks, unless you receive specific permission. If you do not charge anything for copies of this eBook, complying with the rules is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. They may be modified and printed and given away--you may do practically ANYTHING with public domain eBooks. Redistribution is subject to the trademark license, especially commercial redistribution. *** START: FULL LICENSE *** THE FULL PROJECT GUTENBERG LICENSE PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK To protect the Project Gutenberg-tm mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase "Project Gutenberg"), you agree to comply with all the terms of the Full Project Gutenberg-tm License (available with this file or online at https://gutenberg.org/license). Section 1. General Terms of Use and Redistributing Project Gutenberg-tm electronic works 1.A. By reading or using any part of this Project Gutenberg-tm electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg-tm electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg-tm electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8. 1.B. "Project Gutenberg" is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg-tm electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg-tm electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg-tm electronic works. See paragraph 1.E below. 1.C. The Project Gutenberg Literary Archive Foundation ("the Foundation" or PGLAF), owns a compilation copyright in the collection of Project Gutenberg-tm electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is in the public domain in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg-tm mission of promoting free access to electronic works by freely sharing Project Gutenberg-tm works in compliance with the terms of this agreement for keeping the Project Gutenberg-tm name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg-tm License when you share it without charge with others. 1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg-tm work. The Foundation makes no representations concerning the copyright status of any work in any country outside the United States. 1.E. Unless you have removed all references to Project Gutenberg: 1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg-tm License must appear prominently whenever any copy of a Project Gutenberg-tm work (any work on which the phrase "Project Gutenberg" appears, or with which the phrase "Project Gutenberg" is associated) is accessed, displayed, performed, viewed, copied or distributed: This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org 1.E.2. If an individual Project Gutenberg-tm electronic work is derived from the public domain (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase "Project Gutenberg" associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or 1.E.9. 1.E.3. If an individual Project Gutenberg-tm electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg-tm License for all works posted with the permission of the copyright holder found at the beginning of this work. 1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg-tm. 1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg-tm License. 1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg-tm work in a format other than "Plain Vanilla ASCII" or other format used in the official version posted on the official Project Gutenberg-tm web site (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original "Plain Vanilla ASCII" or other form. Any alternate format must include the full Project Gutenberg-tm License as specified in paragraph 1.E.1. 1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg-tm works unless you comply with paragraph 1.E.8 or 1.E.9. 1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg-tm electronic works provided that - You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg-tm works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg-tm trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, "Information about donations to the Project Gutenberg Literary Archive Foundation." - You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg-tm License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg-tm works. - You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work. - You comply with all other terms of this agreement for free distribution of Project Gutenberg-tm works. 1.E.9. If you wish to charge a fee or distribute a Project Gutenberg-tm electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from both the Project Gutenberg Literary Archive Foundation and Michael Hart, the owner of the Project Gutenberg-tm trademark. Contact the Foundation as set forth in Section 3 below. 1.F. 1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread public domain works in creating the Project Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm electronic works, and the medium on which they may be stored, may contain "Defects," such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment. 1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right of Replacement or Refund" described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg-tm trademark, and any other party distributing a Project Gutenberg-tm electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH F3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE. 1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem. 1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE. 1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions. 1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg-tm electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg-tm electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg-tm work, (b) alteration, modification, or additions or deletions to any Project Gutenberg-tm work, and (c) any Defect you cause. Section 2. Information about the Mission of Project Gutenberg-tm Project Gutenberg-tm is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life. Volunteers and financial support to provide volunteers with the assistance they need are critical to reaching Project Gutenberg-tm's goals and ensuring that the Project Gutenberg-tm collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg-tm and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation web page at https://www.pglaf.org. Section 3. Information about the Project Gutenberg Literary Archive Foundation The Project Gutenberg Literary Archive Foundation is a non profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation's EIN or federal tax identification number is 64-6221541. Its 501(c)(3) letter is posted at https://pglaf.org/fundraising. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state's laws. The Foundation's principal office is located at 4557 Melan Dr. S. Fairbanks, AK, 99712., but its volunteers and employees are scattered throughout numerous locations. Its business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email business@pglaf.org. Email contact links and up to date contact information can be found at the Foundation's web site and official page at https://pglaf.org For additional contact information: Dr. Gregory B. Newby Chief Executive and Director gbnewby@pglaf.org Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation Project Gutenberg-tm depends upon and cannot survive without wide spread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS. The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit https://pglaf.org While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate. International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff. Please check the Project Gutenberg Web pages for current donation methods and addresses. Donations are accepted in a number of other ways including including checks, online payments and credit card donations. To donate, please visit: https://pglaf.org/donate Section 5. General Information About Project Gutenberg-tm electronic works. Professor Michael S. Hart was the originator of the Project Gutenberg-tm concept of a library of electronic works that could be freely shared with anyone. For thirty years, he produced and distributed Project Gutenberg-tm eBooks with only a loose network of volunteer support. Project Gutenberg-tm eBooks are often created from several printed editions, all of which are confirmed as Public Domain in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition. Most people start at our Web site which has the main PG search facility: https://www.gutenberg.org This Web site includes information about Project Gutenberg-tm, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.