The Project Gutenberg EBook of Italian Harpsichord-Building in the 16th and 17th Centuries, by John D. Shortridge This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org Title: Italian Harpsichord-Building in the 16th and 17th Centuries Author: John D. Shortridge Release Date: November 4, 2008 [EBook #27149] Language: English Character set encoding: ISO-8859-1 *** START OF THIS PROJECT GUTENBERG EBOOK ITALIAN HARPSICHORD-BUILDING *** Produced by Chris Curnow, Joseph Cooper, Greg Bergquist and the Online Distributed Proofreading Team at https://www.pgdp.net _Italian Harpsichord-Building in the 16th and 17th Centuries_ by John D. Shortridge (REPRINTED WITH CHANGES--1970) CONTRIBUTIONS FROM THE MUSEUM OF HISTORY AND TECHNOLOGY UNITED STATES NATIONAL MUSEUM BULLETIN 225 · Paper 15, Pages 93-107 SMITHSONIAN INSTITUTION PRESS · WASHINGTON, D.C. · 1970 [Illustration: Figure 1.--OUTER CASE OF ALBANA HARPSICHORD.] Italian Harpsichord-Building in the 16th and 17th Centuries By John D. Shortridge _The making of harpsichords flourished in Italy throughout the 16th and 17th centuries. The Italian instruments were of simpler construction than those built by the North Europeans, and they lacked the familiar second manual and array of stops._ _In this paper, typical examples of Italian harpsichords from the Hugo Worch Collection in the United States National Museum are described in detail and illustrated. Also, the author offers an explanation for certain puzzling variations in keyboard ranges and vibrating lengths of strings of the Italian harpsichords._ THE AUTHOR: _John D. Shortridge is associate curator of cultural history in the United States National Museum, Smithsonian Institution._ Perhaps the modern tendency to idealize progress has been responsible for the neglect of Italian harpsichords and virginals during the present day revival of interest in old musical instruments. Whatever laudable traits the Italian builders may have had, they cannot be considered to have been progressive. Their instruments of the mid-16th century hardly can be distinguished from those made around 1700. During this 150 years the pioneering Flemish makers added the four-foot register, a second keyboard, and lute and buff stops to their instruments. However, the very fact that the Italian builders were unwilling to change their models suggests that their instruments were good enough to demand no further improvements. Anyone who has heard a properly restored Italian harpsichord or an accurately made reproduction will agree that the tone of such instruments is of exceptional beauty. This paper consists of a description of the structural features of two typical Italian instruments and a general discussion of the stringing and tuning of Italian harpsichords and virginals that is based on certain measurements of 33 instruments housed in various museums in the United States. To the curators and other staff members of these institutions I express my sincere gratitude for making it possible for me to measure valuable instruments entrusted to their care or for supplying similar information by mail. The first type of instrument described below usually has been designated in modern books about musical instruments and in catalogs of instrument collections as a spinet, the term virginal being applied to the rectangular instruments having the keyboard along the long side. Since both of these types have basically the same arrangement of keyboard, wrest plank, hitch pins, strings and jacks, and since both types were known as virginals in 17th-century England, it is logical to reserve the term spinet for another kind of instrument, namely the one with the wrest plank and tuning pins in front over the keyboard, and with the strings stretched diagonally. Such instruments were popular in England in the late 17th and early 18th centuries and were known in English as spinets during the period of their popularity. By using the term polygonal virginal we can distinguish, when necessary, the five-sided Italian model from the rectangular instruments usually produced in northern Europe. Some rectangular virginals were made in Italy; one Flemish polygonal virginal, made by the elder Hans Ruckers in 1591, survives. Long instruments, resembling the grand piano in shape, are called harpsichords. Of course it is understood that both types of virginals as well as the spinet and the harpsichord were keyed chordophones employing the plucking action of jacks and plectra. [Illustration: Figure 2.--POLYGONAL VIRGINAL IN OUTER CASE.] Throughout this paper the different octaves are indicated according to the following system: [Illustration: Music] [Illustration: Figure 3.--POLYGONAL VIRGINAL REMOVED FROM OUTER CASE.] The Typical Italian Polygonal Virginal To give a clear idea of the construction of the Italian polygonal virginal, a detailed description of one particular example is presented here. This virginal is included in the Hugo Worch collection at the U.S. National Museum. The maker's name is not known, but the instrument is believed to have been built around 1600. As is true of the great majority of Italian virginals and harpsichords of the 16th and 17th centuries, the instrument proper is removable from its outer case. The outer case (fig. 2), of sturdier construction than the virginal which it was designed to protect, is made of wood about 1/2" thick and is decorated with paintings of female figures and garlands. The original legs are missing. Our main interest is in the virginal proper (fig. 3), the construction of which is comparable in some ways to that of the violin. The very thin sides of the virginal are held together at the corners by blocks, and the soundboard is supported by a lining. The cross section drawing (fig. 4) shows the 9/16" thick bottom and the sides which are 1/8" thick. The lining, 1/2" by 1-1/3", runs around four sides of the instrument, the wrest plank replacing it on the fifth side. The soundboard thickness, measured inside the holes through which the jacks pass, varies from 1/16" in the bass to 1/8" in the treble. The manner in which variations in thickness are distributed over the entire soundboard has not been determined. The cross section drawing also shows the beautifully executed mouldings that make the sides appear to be thicker than they really are. The positions of the knee braces, the shape of which can be seen in figure 4, are shown along either side of the keyboard in figure 5. These braces are 3/4" thick. The positions of the blocks, small pieces with the grain running perpendicular to the bottom, and the wrest plank, which is 1-1/4" thick, are also shown. The two ribs are attached to the underside of the soundboard in the positions indicated. The jack guide, built up of separate pieces held together by long strips down either side, is glued to the underside of the soundboard and extends as far as the lining in the treble but stops a little short of it in the bass (fig. 5). The jack guide is 15/16" thick. The layout of the soundboard in figure 6 gives the relative positions of the bridges, tuning pins, hitch pins, strings, jacks, and jack rail. There is, of course, one jack and one string per key. The jacks presently in this virginal, not being original, will not be described. Typical Italian jacks will be described later. The bridges are 5/16" wide and vary in height from 7/16" in the bass to 3/8" in the treble. A cross section of one of the bridges appears in figure 4. The jack rail, also shown in figure 4, extends over the jacks 1-1/8" above the soundboard. It serves not only to prevent the jacks from flying out during play but also to terminate the downward fall of the fronts of the keys. The keys do not drop far enough to touch the key frame, but instead are stopped by the jacks striking the jack rail. [Illustration: Figure 4.--CROSS SECTION OF POLYGONAL VIRGINAL. A, side; B, bottom; C, knee; D, liner; E, soundboard; F, rib; G, bridge; H string; I, jack rail. Scale, 1:2.] The keyboard has an apparent compass of four octaves and one note from _E_ to _f´´´_. Short octave tuning would have extended the compass down a major third to _C_ in the bass, with the _E_ key sounding _C_, the _F#_ key sounding _D_, the _G#_ key sounding _E_, and the remaining keys sounding their proper pitches. These three keys will hereafter be referred to as _C/E_, _D/F#_ and _E/G#_. The lowest eight keys have small wire eyes attached to their undersides near the front. A corresponding slot is cut through the inner and outer cases, allowing the eyes to be connected to a short pedal keyboard which has not survived. The keys themselves vary in length from 10" in the bass to 18-1/2" in the treble; they are mounted on a trapezoidal key frame which is removable from the instrument. The balance rail and balance rail pins are on a diagonal, resulting in a gradual but noticeable change in the touch from one end of the keyboard to the other. The rack, 1/2" thick and 1-3/4" high, is fastened along the back of the key frame and has one vertical saw cut for each key. Projecting from the back of each key is a small sliver of wood which rides in its proper saw cut and serves to guide the key. The natural keys are veneered with boxwood and have arcaded boxwood fronts. The sharps are small blocks of hardwood stained black. The sides, soundboard, ribs, jacks, guide, jackrail, and mouldings are made of cypress, the wrest plank and bridges are of walnut, and the framework, bottom, keys, and key frame are of pine. The photographs (figs. 2, 3) show the decorative use of ivory studs. On the soundboard appears the Latin inscription _Vita brevis, ars longa_. A laminated parchment rose, 3-3/16" in diameter, is placed in the soundboard in the position indicated in figure 6. A typical example of this decorative device is shown in figure 12. The above-described virginal is typical of Italian practice. Other examples studied generally have differed from it only in small details, except in the case of compass and vibrating lengths of strings. These factors will be discussed in detail in a following section. [Illustration: Figure 5.--INTERIOR OF POLYGONAL VIRGINAL. A, lining; B, wrest plank; C, rib; D, jack guide; E, knee; F, rack. Broken lines indicate positions of corner blocks and brace under wrest plank. Scale, 1:8.] [Illustration: Figure 6.--SOUNDBOARD LAYOUT OF POLYGONAL VIRGINAL. Scale, 1:8.] [Illustration: Figure 7.--RIDOLFI HARPSICHORD REMOVED FROM CASE.] [Illustration: Figure 8.--CROSS SECTION OF RIDOLFI HARPSICHORD. A, bottom; B, knee; C, lining; D, soundboard. Scale, 1:2.] The Typical Italian Harpsichord The instrument chosen to illustrate the stylistic features of the Italian harpsichord is also in the collection of the U.S. National Museum. This harpsichord, purchased for the Museum in 1892 by Dr. G. Brown Goode, was made in 1665 by Giacomo Ridolfi, who claimed Girolamo Zenti as his teacher. The inscription on the nameboard reads "Jacobus Rodolphus Hieronymi de Zentis Discipulus MDCLXV Facieba." Like the virginal described above, this harpsichord is separable from its outer case. The outer case rests on a separate stand consisting of three gilt cupids and a floral garland. Since the painted decoration of this case is not original, another outer case, belonging to a harpsichord made by Horatius Albana in 1633, was selected for the illustration (fig. 1). Two unison strings per key and two registers of jacks are provided. The apparent compass of the keyboard is from _C/E_ to _c´´´_. The remains of pedal connections can be seen on the lowest eight keys. The sides of the harpsichord are 5/32" thick; the bottom is 9/16" thick. The sides and lining are supported by knees that do not extend clear across the bottom of the instrument as they do in the virginal. The knees are small triangular pieces, as shown in figure 8. Since the added tension of the second set of strings demands a somewhat more substantial framework than that employed in the virginal, a series of braces are attached to the floor. These are connected to the lining by several diagonal braces (fig. 9). This produces a remarkably strong but very light structure. The keys (not shown) are of more constant length than those of the virginal; therefore, the touch is much more uniform. [Illustration: Figure 9.--FRAMEWORK OF HARPSICHORD. A, wrest plank; B, belly rail; C, rib; D, bottom brace; E, diagonal brace; F, knee; G, lining. Scale, 1:8.] [Illustration: Figure 10.--LAYOUT OF HARPSICHORD SOUNDBOARD. Scale, 1:8.] The wrest plank is supported by two end blocks, against which the partition behind the action (called the belly rail) is also placed. The soundboard is glued to the top of the belly rail. The wrest plank is veneered with cypress, giving the appearance that the soundboard extends over it. The jack guides also rest on the end blocks in the space between the wrest plank and the belly rail. Figures 8 and 11 clarify the arrangement of these structural features. Figure 10 shows the layout of ribs, bridges, and strings on the soundboard. The soundboard is about 1/8" thick. The bridge on the wrest plank tapers in height from 3/8" in the treble to 7/16" in the bass and in width from 5/16" to 7/16". The soundboard bridge measures about 3/8" by 1/4" and has virtually no taper. The soundboard does not have a rose, although that decorative device is fairly common on Italian harpsichords. The jack guides are built up of spacer blocks held together by thin strips along the sides. There is now no provision for moving the guides, although plugged-up holes visible in the right end of each guide suggest that they originally could be disengaged. In Italian harpsichords generally, the jack guides were controlled by knobs projecting through the sides of the case. Sometimes these harpsichords had levers pivoted on the wrest plank and attached to the guides. The Ridolfi case has not been patched and there are no holes in the wrest plank where levers could have been attached; so, the guides probably were not intended to be movable. The jacks are simple slips of walnut measuring about 3/16" by 7/16" by 3-1/8". The arrangement of the tongue, spring, plectrum, and damper are shown in figure 11. The dampers are small pieces of buckskin held in slots at the tops of the jacks. The plectra, perhaps not original, are of leather. Of course, there are no adjusting screws or capstans of any variety. The direction in which the plectra of each row of jacks should be pointing is not known. Two clavicytheria having two registers of strings and a single row of double tongue jacks have been examined by the author. Each of these jacks has two plectra, one pointing to the right and one to the left. Turning these jacks around does not alter the order of direction. The plectra nearest the keyboard points the same way whether the jack is upside down or not. In the clavicytherium at the Smithsonian Institution the plectra nearest the keyboard points to the player's left. In a clavicytherium at the Boston Museum of Fine Arts the opposite is true. Probably both arrangements were used in harpsichords also. String Lengths and Pitch Standards The vibrating lengths of the strings of the polygonal virginal and of the Ridolfi harpsichord can be roughly determined from the drawings. For purposes of comparison, a tabulation of the vibrating lengths (in inches) of the _C_ strings on both instruments follows: _Polygonal _Harpsichord_ virginal_ c´´´ 6-5/8 5-1/16 c´´ (pitch C) 12-15/16 10 c´ (middle C) 25-9/16 20-1/2 c 43-5/16 42-1/16 C/E 50-5/6 61-1/4 The lengths shown for the harpsichord represent the shorter of the two strings with which each key is provided. In order to produce a uniform tone color throughout the compass of a stringed instrument, it is necessary, among other things, to have the tension of all the strings reasonably uniform. In the treble this is accomplished by varying the string lengths. Since the length of a vibrating string is inversely proportional to its frequency, each string is made about half as long as the string an octave below, two thirds as long as the string a fifth below, etc. This principle cannot be carried all the way into the bass since the lowest strings would be inconveniently long, so somewhere below middle _C_ the strings are gradually shortened and the diameters of the wires are increased in compensation. As the above comparison shows, the string lengths are approximately doubled at each descending octave down to _c´_ on the virginal and _c_ on the harpsichord. The shape of the case allows the harpsichord to have longer bass strings than the virginal; between _c´_ and _c_ the string length is doubled in the harpsichord. However, in the virginal the _c_ string is considerably less than twice as long as the string an octave above. In fact, the bass strings of the virginal are shortened to such an extent that the lowest string of the harpsichord is much longer than the lowest string of the virginal, although in the treble the virginal has longer strings than the harpsichord. If the length of one treble string of an instrument of this sort is known, the lengths of all but the bass strings can be readily inferred; we can approximately describe the lengths of two-thirds to three-fourths of the strings of either of the above instruments by giving the length of one string. It has become customary to use _c´´_ for this purpose, and to refer to it in such cases as pitch _C_. In examining a number of Italian harpsichords and virginals dating from 1540 to 1694, lengths for pitch _C_ ranging from 8" to 13-3/4" have been found. This seems to be a great discrepancy for instruments that are otherwise so standardized. Since a uniform standard of pitch did not yet exist in the 16th and 17th centuries, we would expect the string lengths employed to be varied somewhat in order to accommodate the instruments to higher or lower tunings. Also, a preference for the sound of thinner, longer wires or shorter, thicker ones may have caused some builders to increase or decrease the string lengths on their instruments in proportion to the string diameters chosen. We have no precise evidence concerning the original wire gauges of the strings of Italian harpsichords and virginals. Although the variety of pitch _C_ lengths encountered on the instruments studied can partially be accounted for by these two factors, a third and more important cause existed. Among the 33 instruments about which information has been secured, a correlation is discernible between the apparent manual compass and the pitch _C_ string lengths. Sixteen of the instruments ascend to _f´´´_. For these, the length of the pitch _C_ string varies from 10-1/4" to 13-3/4". The remaining instruments, with either _a´´_ or _c´´´_ as the highest notes, have pitch _C_ strings ranging from 8" to 11-3/8" in length. If the average tension and wire diameter of the two groups are assumed to have been about equal, the difference in string lengths would suggest a corresponding difference in pitch, the instruments having the compass extended to _f´´´_ sounding somewhat lower than the others. [Illustration: Figure 11.--ACTION OF HARPSICHORD. A, bottom; B, belly rail; C, soundboard; D, wrest plank; E, key frame; F, rack; G, key; H, jack; I, jack rail. Scale, 1:2.] There is some historical evidence that this actually was the case. In his _Theatrum Instrumentorum_ Michael Praetorius[1] pictures a polygonal virginal, which appears to be very much like the many Italian examples that survive today, and a rectangular virginal that seems to be Flemish. He specifies that both are _so recht Chor-Thon_ (at regular choir pitch). Praetorius also shows a harpsichord[2] that looks like a typical Italian instrument except for the presence of a set of strings tuned an octave above unison pitch, a rare feature on Italian harpsichords. This harpsichord is described as _so eine Quart tieffer alss Chor-Thon_ (a fourth lower than choir pitch), clearly indicating that single manual keyboard instruments a fourth apart in pitch were in existence. Since no reason is given for the harpsichord being tuned a fourth lower than the two virginals, we may assume that the author considered the matter commonplace enough as to demand no further elaboration and that instruments a fourth apart in pitch were not rare. Praetorius does not state that the harpsichord in his illustration was tuned to a low pitch standard, which was actually used for certain purposes or in particular localities. He discussed the numerous pitches in use before and during his time, but the only one that he mentioned as being a fourth below choir pitch he considered obsolete and suitable only for plainsong. If the harpsichord was not intended to be tuned to this standard and used for this purpose, it must have been tuned to choir pitch and treated as a transposing instrument. Querinus van Blankenburg,[3] writing in 1739, states: At that time [the beginning of the 17th century], men had so little experience in transposition that in order to be able to transpose a piece a fourth downwards they made a special second keyboard in the harpsichord for this purpose. This seems incredible, but the very remarkable proof is the fact that the famous Ruckers from the beginning of the last century for a period of more than thirty years made harpsichords only in this way.[4] That the second manual of the two-manual harpsichord originated as a device for transposition is well known. In an article titled "Transposing Keyboards on Extant Flemish Harpsichords," Sibyl Marcuse[5] discusses surviving examples that show how the second keyboard was arranged. The upper keyboard was the principal one, with the lower keyboard sounding a fourth below. The strings acted upon by a _c_ key on the upper manual were sounded by an _f_ key on the lower; so, in changing from the upper manual to the lower, the player would have to move his hands to the left the distance of a perfect fourth in order to strike the same keys, thus producing the downward transposition. The compass of the upper manual was _E/C_ to _c´´´_. Since the lower keyboard was shifted to the left, space was provided for five additional keys at its treble end. The apparent treble range of the lower keyboard was therefore extended to _f´´´_, although the lower _f´´´_ and upper _c´´´_ keys worked on the same strings and produced the same pitch. Room was also made for five extra bass keys at the lower end of the upper manual. However, since short octave tuning was employed and it was desirable to be able to use the same fingering in the bass on both manuals, the tails of the _C/E_, _D/F#_ and _E/G#_ keys of the upper manual had to be bent to the left in order to work on the strings played by the _F_, _G_, and _A_ keys respectively of the lower manual. The vacant space to the left of the upper manual _C/E_ was filled by a block of wood. Hence the five extra bass strings not used by the upper manual were those played by the _C/E_, _D/F#_, _E/G#_, _B_, and _c#_ keys of the lower keyboard. Of the 16 Italian harpsichords and virginals studied that ascend in the treble to _f´´´_, 13 range to _C/E_ in the bass, thus having exactly the same compass as the lower (transposing) keyboard of the Flemish two-manual instruments. Twelve of the 14 Italian examples having _c´´´_ as the highest key stop on _C/E_ in the bass and are identical in apparent compass to the Ruckers upper manual. The correlation of compass and string length of the Italian instruments, the statements of Praetorius, and the similarity of the Italian keyboard ranges to those of the Ruckers transposing harpsichords have been considered. A plausible conclusion is that the Italian instruments extending to _f´´´_ were transposing instruments sounding a perfect fourth lower than the prevailing pitch standard. Adopting the terminology used for orchestral wind instruments, these could be referred to as harpsichords in _G_. The evidence of the correlation between string length and compass becomes much more convincing if we assume that the Italian builders abandoned the practice of making transposing harpsichords about the same time that the Ruckers family stopped employing the transposing lower manual. In the quotation previously given, Querinus van Blankenburg tells us that the Ruckers did not make transposing instruments later than the 1630's. Of the 10 dated Italian instruments with the keyboard extended to _f´´´_, only three were made after the third decade of the 17th century. Each of these has a shorter pitch _C_ string than any of the seven earlier instruments. These three harpsichords, dated 1654, 1658, and 1666, are accordingly considered nontransposing instruments, with the extra treble keys representing an actual extension of the upward range. The six undated instruments with _f´´´_ in the treble are classified as transposing instruments because of their pitch _C_ lengths and are accordingly believed to have been made before about 1635. [Illustration: Figure 12.--TYPICAL DECORATIVE DEVICE, known as rose, that appeared in soundboards of virginals and harpsichords.] The 33 instruments on which this study is based are classified in the list on page 107. They are grouped according to whether the highest key is _f´´´_ or _c´´´_, with the exceptions of the three harpsichords mentioned in the preceding paragraph and three instruments that go only to _a´´_. That the three instruments ending on _a´´_ belong with the nontransposing group is indicated by their string lengths. The listing gives additional information about each example. String lengths of instruments having two registers are for the shorter of the two pitch _C_ strings. Information has been secured on two Italian virginals which were not included in the tabulation. Their measurements are completely at variance with the pattern consistently set by the other 33 examples studied. One, made by Giovanni Domenico in 1556, is in the Skinner collection; it has a pitch _C_ string 14-1/16" in length and an apparent compass of _C/E_ to _c´´´_. The other, with the same apparent compass and a 7-1/2" pitch _C_ string, is at Yale University. Whether these instruments are exceptional in terms of the pitch to which they were tuned, the tension which was applied to the strings, or the thickness and weight of the strings themselves, has not been determined. The average of the pitch _C_ lengths of the transposing instruments in the list is 12.78"; that of the nontransposing group is 10.45". This suggests a separation between the two groups of about a major third since the first average is roughly 5/4 of the second. However, the fact that the separation of the two averages is not great enough to positively indicate a perfect fourth--the first average would have to be 4/3 of the second to do so--does not disprove the theory of transposition by a fourth. In the first place, a considerable variety of pitches is no doubt represented in both groups since a universal pitch standard did not exist in the 16th and 17th centuries. Also, a margin of error of only a semitone is as good as could be expected considering the small number of examples on which the averages are based. A further possible justification for the relationship of the two averages is found in Praetorius' discussion of the pitch standards with which he was familiar.[6] He states that choir pitch was a major second lower than chamber pitch and that _tertiam minorem_ was a minor third lower than chamber pitch. Praetorius says of _tertiam minorem_:[7] But in Italy and in various Catholic choirs in Germany, the said lower pitch is much in use. For some Italians, not unjustly, take no pleasure in high singing, and maintain it is not beautiful, and the words cannot be properly understood, and it sounds like crowing, yelling, singing at the top of one's voice.... Possibly some of the nontransposing instruments were tuned to choir pitch and others to _tertiam minorem_, while the transposing instruments were set a fourth lower than choir pitch. Three of the instruments listed are ottavinas, small instruments tuned an octave higher than usual. Ottavinas correspond to a four-foot register. Mersenne[8] mentions that they existed in two sizes, one a fifth above the usual pitch and the other an octave above. The three ottavinas included in the table are considered to be of the size sounding an octave above the usual pitch because they have _C/E_ to _c´´´_ ranges and pitch _C_ string lengths about half the average length of the other instruments in the nontransposing group. Although no examples were found for inclusion in this study, it is probable that some ottavinas a fifth above the usual pitch--and therefore an octave higher than the transposing instruments in our listing--survive. Such instruments would be expected to have apparent ranges of _C/E_ to _f´´´_ and pitch _C_ strings between 5-3/4" and 6-3/4" in length. DATA ON THE 33 INSTRUMENTS STUDIED KEY: A.: _Date_ B.: _Pitch C length_ (_in inches_) C.: _Apparent compass_ D.: _Type_ E.: _Registers_ F.: _Maker_ G.: _Present location_ A. B. C. D. E. F. G. TRANSPOSING INSTRUMENTS 1540 11-11/16 C/E-f´´´ Polygonal 8´ Vi ... ies Metropolitan virginal Museum of Art 1569 13-1/4 C/E-f´´´ Polygonal 8´ Annibale Juilliard virginal Rossi School of Music 1602 13-1/4 C/E-f´´´ Rectangular 8´ Ioannes Smithsonian virginal Baptista Institution Bononien 1610 13-1/2 C/E-f´´´´ Polygonal 8´ Pasquino Harding virginal Querci Museum, Chicago 1613 11-1/2 C/E-f´´´ Harpsichord 8´8´ Pasquino Smithsonian Querci Institution 1617 13-3/4 C/E-f´´´ Polygonal 8´ Giovanni Yale virginal Battista University, Boni New Haven, Conn. 1620 13-9/16 C/E-f´´´ Polygonal 8´ Francesco Rhode Island virginal Poggio School of Design, Providence 11-15/16 C/E-f´´´ Polygonal 8´ Anonymous Skinner virginal Collection, Holyoke, Mass. 12-15/16 C/E-f´´´ Polygonal 8´ Anonymous Smithsonian virginal Institution 13" C/E-f´´´ Polygonal 8´ Anonymous Boston Museum virginal of Fine Arts 11-1/2 C-f´´´ Polygonal 8´ Anonymous Folger virginal Library, Washington, D.C. 12-3/4 C/E-f´´´ Polygonal 8´ Anonymous Cincinnati virginal Art Museum 13-5/8 C/E-f´´´ Polygonal 8´ Anonymous Smithsonian virginal Institution NONTRANSPOSING INSTRUMENTS 1548 11 C/E-c´´´ Polygonal 8´ Domenicus Metropolitan virginal Pesaurensis Museum of Art 1554 [a]10-1/2 C/E-c´´´ Harpsichord 8´8´ Padre Vassar Stoppacio College, Poughkeepsie, New York 1585 [b]11-1/2 C/E-a´´ Ottavina 4´ Franciscus Metropolitan Bonafinis Museum of Art 1602 10-1/2 C/E-c´´´ Harpsichord Christoforus Stearns Rigunini Collection, Ann Arbor, Mich. 1615 [b]9-3/4 C/E-a´´ Ottavina 4´ Pasquino Metropolitan Querci Museum of Art 1625 10-1/8 C/E-c´´´ Harpsichord 8´ Valerius Skinner Peres Collection, Holyoke, Mass. 1633 11-3/8 C/E-c´´´ Harpsichord 8´8´ Horatius Smithsonian Albana Institution 1645 11 C/E-c´´´ Harpsichord 8´8´ Horatius Vizcaya, Albana Miami, Fla. 1654 10-1/4 C/E-f´´´ Harpsichord 8´8´ Anonymous Smithsonian Institution 1658 11-1/8 C-f´´´ Harpsichord 8´8´ Hieronymus Metropolitan de Zentis Museum of Art 1665 10 C/E-c´´´ Harpsichord 8´8´ Giacomo Smithsonian Ridolfi Institution 1666 10-15/16 A_{1}-f´´´ Harpsichord 8´8´ Hieronymus Metropolitan de Zentis Museum of Art 1682 10-7/8 C/E-c´´´ Harpsichord 8´8´ Giacomo Rhode Island Ridolfi School of Design, Providence 1683 8 C/E-c´´´ Polygonal 8´ B. Obici Harding virginal Museum, Chicago 1690 10-13/16 C/E-c´´´ Harpsichord 8´ Giovanni Smithsonian Andrea Institution Menegoni 1693 10-5/16 G_{1}-c´´´ Harpsichord 8´8´ Anonymous Smithsonian Institution 1694 9-7/8 C-c´´´ Harpsichord 8´8´4´ Nicolaus Smithsonian (minus C#) de Quoco Institution 9-3/4 C/E-a´´ Clavicytherium 8´8´ Anonymous Smithsonian Institution [b]10-3/8 C/E-c´´´ Clavicytherium 4´ Anonymous Boston Museum (Ottavina) of Fine Arts 11 C/E-c´´´ Polygonal 8´ Anonymous Smithsonian virginal Institution [a] This length is approximate. It is double the length of the shortest string on the instrument. [b] In order to arrive at a meaningful average value for the string lengths of the nontransposing group, it was necessary to double the measured lengths of the pitch _C_ strings of the three instruments tuned an octave higher. -------+----------+--------- Figure | Negative | Catalog | Number | Number -------+----------+--------- 1 | 56322 | 326,905 2 | 46792 | 303,544 3 | 49355A | 303,544 4 | 49355B | 303,544 5 | 49356A | 303,544 6 | 49356 | 303,544 7 | 49356D | 332,173 8 | 49356D | 332,173 9 | 49357A | 332,173 10 | 49357 | 332,173 11 | 49355C | 332,173 12 | 46795 | 303,545 -------+----------+--------- GPO: 1970 O--380-228 For sale by the Superintendent of Documents, U.S. Government Printing Office, Washington 25, D.C. Price 25 cents. FOOTNOTES: [1] Michael Praetorius, _Theatrum Instrumentorum_, Wolfenbüttel, 1620, pl. 14. [2] _Ibid._, pl. 6. [3] Querinus van Blankenburg, _Elementa Musica_, The Hague, 1739. [4] Translation by Arthur Mendel in "Devices for Transposition in the Organ before 1600," _Acta Musicologica_, 1949, p. 33. [5] Sibyl Marcuse, "Transposing Keyboards on Extant Flemish Harpsichords," _Musical Quarterly_, July 1952. [6] Michael Praetorius, _Syntagma Musicum_, Wolfenbüttel, 1614-1620, vol. 2 (Organographia), chapter 2. [7] Translation by Arthur Mendel in "Pitch in the 16th and early 17th Centuries, Part II," _Musical Quarterly_, April 1948. [8] Marin Mersenne, _Harmonie Universelle_, Paris, 1636, p. 101. End of the Project Gutenberg EBook of Italian Harpsichord-Building in the 16th and 17th Centuries, by John D. Shortridge *** END OF THIS PROJECT GUTENBERG EBOOK ITALIAN HARPSICHORD-BUILDING *** ***** This file should be named 27149-8.txt or 27149-8.zip ***** This and all associated files of various formats will be found in: https://www.gutenberg.org/2/7/1/4/27149/ Produced by Chris Curnow, Joseph Cooper, Greg Bergquist and the Online Distributed Proofreading Team at https://www.pgdp.net Updated editions will replace the previous one--the old editions will be renamed. Creating the works from public domain print editions means that no one owns a United States copyright in these works, so the Foundation (and you!) can copy and distribute it in the United States without permission and without paying copyright royalties. Special rules, set forth in the General Terms of Use part of this license, apply to copying and distributing Project Gutenberg-tm electronic works to protect the PROJECT GUTENBERG-tm concept and trademark. Project Gutenberg is a registered trademark, and may not be used if you charge for the eBooks, unless you receive specific permission. If you do not charge anything for copies of this eBook, complying with the rules is very easy. You may use this eBook for nearly any purpose such as creation of derivative works, reports, performances and research. They may be modified and printed and given away--you may do practically ANYTHING with public domain eBooks. Redistribution is subject to the trademark license, especially commercial redistribution. *** START: FULL LICENSE *** THE FULL PROJECT GUTENBERG LICENSE PLEASE READ THIS BEFORE YOU DISTRIBUTE OR USE THIS WORK To protect the Project Gutenberg-tm mission of promoting the free distribution of electronic works, by using or distributing this work (or any other work associated in any way with the phrase "Project Gutenberg"), you agree to comply with all the terms of the Full Project Gutenberg-tm License (available with this file or online at https://gutenberg.org/license). Section 1. General Terms of Use and Redistributing Project Gutenberg-tm electronic works 1.A. By reading or using any part of this Project Gutenberg-tm electronic work, you indicate that you have read, understand, agree to and accept all the terms of this license and intellectual property (trademark/copyright) agreement. If you do not agree to abide by all the terms of this agreement, you must cease using and return or destroy all copies of Project Gutenberg-tm electronic works in your possession. If you paid a fee for obtaining a copy of or access to a Project Gutenberg-tm electronic work and you do not agree to be bound by the terms of this agreement, you may obtain a refund from the person or entity to whom you paid the fee as set forth in paragraph 1.E.8. 1.B. "Project Gutenberg" is a registered trademark. It may only be used on or associated in any way with an electronic work by people who agree to be bound by the terms of this agreement. There are a few things that you can do with most Project Gutenberg-tm electronic works even without complying with the full terms of this agreement. See paragraph 1.C below. There are a lot of things you can do with Project Gutenberg-tm electronic works if you follow the terms of this agreement and help preserve free future access to Project Gutenberg-tm electronic works. See paragraph 1.E below. 1.C. The Project Gutenberg Literary Archive Foundation ("the Foundation" or PGLAF), owns a compilation copyright in the collection of Project Gutenberg-tm electronic works. Nearly all the individual works in the collection are in the public domain in the United States. If an individual work is in the public domain in the United States and you are located in the United States, we do not claim a right to prevent you from copying, distributing, performing, displaying or creating derivative works based on the work as long as all references to Project Gutenberg are removed. Of course, we hope that you will support the Project Gutenberg-tm mission of promoting free access to electronic works by freely sharing Project Gutenberg-tm works in compliance with the terms of this agreement for keeping the Project Gutenberg-tm name associated with the work. You can easily comply with the terms of this agreement by keeping this work in the same format with its attached full Project Gutenberg-tm License when you share it without charge with others. 1.D. The copyright laws of the place where you are located also govern what you can do with this work. Copyright laws in most countries are in a constant state of change. If you are outside the United States, check the laws of your country in addition to the terms of this agreement before downloading, copying, displaying, performing, distributing or creating derivative works based on this work or any other Project Gutenberg-tm work. The Foundation makes no representations concerning the copyright status of any work in any country outside the United States. 1.E. Unless you have removed all references to Project Gutenberg: 1.E.1. The following sentence, with active links to, or other immediate access to, the full Project Gutenberg-tm License must appear prominently whenever any copy of a Project Gutenberg-tm work (any work on which the phrase "Project Gutenberg" appears, or with which the phrase "Project Gutenberg" is associated) is accessed, displayed, performed, viewed, copied or distributed: This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.org 1.E.2. If an individual Project Gutenberg-tm electronic work is derived from the public domain (does not contain a notice indicating that it is posted with permission of the copyright holder), the work can be copied and distributed to anyone in the United States without paying any fees or charges. If you are redistributing or providing access to a work with the phrase "Project Gutenberg" associated with or appearing on the work, you must comply either with the requirements of paragraphs 1.E.1 through 1.E.7 or obtain permission for the use of the work and the Project Gutenberg-tm trademark as set forth in paragraphs 1.E.8 or 1.E.9. 1.E.3. If an individual Project Gutenberg-tm electronic work is posted with the permission of the copyright holder, your use and distribution must comply with both paragraphs 1.E.1 through 1.E.7 and any additional terms imposed by the copyright holder. Additional terms will be linked to the Project Gutenberg-tm License for all works posted with the permission of the copyright holder found at the beginning of this work. 1.E.4. Do not unlink or detach or remove the full Project Gutenberg-tm License terms from this work, or any files containing a part of this work or any other work associated with Project Gutenberg-tm. 1.E.5. Do not copy, display, perform, distribute or redistribute this electronic work, or any part of this electronic work, without prominently displaying the sentence set forth in paragraph 1.E.1 with active links or immediate access to the full terms of the Project Gutenberg-tm License. 1.E.6. You may convert to and distribute this work in any binary, compressed, marked up, nonproprietary or proprietary form, including any word processing or hypertext form. However, if you provide access to or distribute copies of a Project Gutenberg-tm work in a format other than "Plain Vanilla ASCII" or other format used in the official version posted on the official Project Gutenberg-tm web site (www.gutenberg.org), you must, at no additional cost, fee or expense to the user, provide a copy, a means of exporting a copy, or a means of obtaining a copy upon request, of the work in its original "Plain Vanilla ASCII" or other form. Any alternate format must include the full Project Gutenberg-tm License as specified in paragraph 1.E.1. 1.E.7. Do not charge a fee for access to, viewing, displaying, performing, copying or distributing any Project Gutenberg-tm works unless you comply with paragraph 1.E.8 or 1.E.9. 1.E.8. You may charge a reasonable fee for copies of or providing access to or distributing Project Gutenberg-tm electronic works provided that - You pay a royalty fee of 20% of the gross profits you derive from the use of Project Gutenberg-tm works calculated using the method you already use to calculate your applicable taxes. The fee is owed to the owner of the Project Gutenberg-tm trademark, but he has agreed to donate royalties under this paragraph to the Project Gutenberg Literary Archive Foundation. Royalty payments must be paid within 60 days following each date on which you prepare (or are legally required to prepare) your periodic tax returns. Royalty payments should be clearly marked as such and sent to the Project Gutenberg Literary Archive Foundation at the address specified in Section 4, "Information about donations to the Project Gutenberg Literary Archive Foundation." - You provide a full refund of any money paid by a user who notifies you in writing (or by e-mail) within 30 days of receipt that s/he does not agree to the terms of the full Project Gutenberg-tm License. You must require such a user to return or destroy all copies of the works possessed in a physical medium and discontinue all use of and all access to other copies of Project Gutenberg-tm works. - You provide, in accordance with paragraph 1.F.3, a full refund of any money paid for a work or a replacement copy, if a defect in the electronic work is discovered and reported to you within 90 days of receipt of the work. - You comply with all other terms of this agreement for free distribution of Project Gutenberg-tm works. 1.E.9. If you wish to charge a fee or distribute a Project Gutenberg-tm electronic work or group of works on different terms than are set forth in this agreement, you must obtain permission in writing from both the Project Gutenberg Literary Archive Foundation and Michael Hart, the owner of the Project Gutenberg-tm trademark. Contact the Foundation as set forth in Section 3 below. 1.F. 1.F.1. Project Gutenberg volunteers and employees expend considerable effort to identify, do copyright research on, transcribe and proofread public domain works in creating the Project Gutenberg-tm collection. Despite these efforts, Project Gutenberg-tm electronic works, and the medium on which they may be stored, may contain "Defects," such as, but not limited to, incomplete, inaccurate or corrupt data, transcription errors, a copyright or other intellectual property infringement, a defective or damaged disk or other medium, a computer virus, or computer codes that damage or cannot be read by your equipment. 1.F.2. LIMITED WARRANTY, DISCLAIMER OF DAMAGES - Except for the "Right of Replacement or Refund" described in paragraph 1.F.3, the Project Gutenberg Literary Archive Foundation, the owner of the Project Gutenberg-tm trademark, and any other party distributing a Project Gutenberg-tm electronic work under this agreement, disclaim all liability to you for damages, costs and expenses, including legal fees. YOU AGREE THAT YOU HAVE NO REMEDIES FOR NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY OR BREACH OF CONTRACT EXCEPT THOSE PROVIDED IN PARAGRAPH F3. YOU AGREE THAT THE FOUNDATION, THE TRADEMARK OWNER, AND ANY DISTRIBUTOR UNDER THIS AGREEMENT WILL NOT BE LIABLE TO YOU FOR ACTUAL, DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE OR INCIDENTAL DAMAGES EVEN IF YOU GIVE NOTICE OF THE POSSIBILITY OF SUCH DAMAGE. 1.F.3. LIMITED RIGHT OF REPLACEMENT OR REFUND - If you discover a defect in this electronic work within 90 days of receiving it, you can receive a refund of the money (if any) you paid for it by sending a written explanation to the person you received the work from. If you received the work on a physical medium, you must return the medium with your written explanation. The person or entity that provided you with the defective work may elect to provide a replacement copy in lieu of a refund. If you received the work electronically, the person or entity providing it to you may choose to give you a second opportunity to receive the work electronically in lieu of a refund. If the second copy is also defective, you may demand a refund in writing without further opportunities to fix the problem. 1.F.4. Except for the limited right of replacement or refund set forth in paragraph 1.F.3, this work is provided to you 'AS-IS' WITH NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR ANY PURPOSE. 1.F.5. Some states do not allow disclaimers of certain implied warranties or the exclusion or limitation of certain types of damages. If any disclaimer or limitation set forth in this agreement violates the law of the state applicable to this agreement, the agreement shall be interpreted to make the maximum disclaimer or limitation permitted by the applicable state law. The invalidity or unenforceability of any provision of this agreement shall not void the remaining provisions. 1.F.6. INDEMNITY - You agree to indemnify and hold the Foundation, the trademark owner, any agent or employee of the Foundation, anyone providing copies of Project Gutenberg-tm electronic works in accordance with this agreement, and any volunteers associated with the production, promotion and distribution of Project Gutenberg-tm electronic works, harmless from all liability, costs and expenses, including legal fees, that arise directly or indirectly from any of the following which you do or cause to occur: (a) distribution of this or any Project Gutenberg-tm work, (b) alteration, modification, or additions or deletions to any Project Gutenberg-tm work, and (c) any Defect you cause. Section 2. Information about the Mission of Project Gutenberg-tm Project Gutenberg-tm is synonymous with the free distribution of electronic works in formats readable by the widest variety of computers including obsolete, old, middle-aged and new computers. It exists because of the efforts of hundreds of volunteers and donations from people in all walks of life. Volunteers and financial support to provide volunteers with the assistance they need, is critical to reaching Project Gutenberg-tm's goals and ensuring that the Project Gutenberg-tm collection will remain freely available for generations to come. In 2001, the Project Gutenberg Literary Archive Foundation was created to provide a secure and permanent future for Project Gutenberg-tm and future generations. To learn more about the Project Gutenberg Literary Archive Foundation and how your efforts and donations can help, see Sections 3 and 4 and the Foundation web page at https://www.pglaf.org. Section 3. Information about the Project Gutenberg Literary Archive Foundation The Project Gutenberg Literary Archive Foundation is a non profit 501(c)(3) educational corporation organized under the laws of the state of Mississippi and granted tax exempt status by the Internal Revenue Service. The Foundation's EIN or federal tax identification number is 64-6221541. Its 501(c)(3) letter is posted at https://pglaf.org/fundraising. Contributions to the Project Gutenberg Literary Archive Foundation are tax deductible to the full extent permitted by U.S. federal laws and your state's laws. The Foundation's principal office is located at 4557 Melan Dr. S. Fairbanks, AK, 99712., but its volunteers and employees are scattered throughout numerous locations. Its business office is located at 809 North 1500 West, Salt Lake City, UT 84116, (801) 596-1887, email business@pglaf.org. Email contact links and up to date contact information can be found at the Foundation's web site and official page at https://pglaf.org For additional contact information: Dr. Gregory B. Newby Chief Executive and Director gbnewby@pglaf.org Section 4. Information about Donations to the Project Gutenberg Literary Archive Foundation Project Gutenberg-tm depends upon and cannot survive without wide spread public support and donations to carry out its mission of increasing the number of public domain and licensed works that can be freely distributed in machine readable form accessible by the widest array of equipment including outdated equipment. Many small donations ($1 to $5,000) are particularly important to maintaining tax exempt status with the IRS. The Foundation is committed to complying with the laws regulating charities and charitable donations in all 50 states of the United States. Compliance requirements are not uniform and it takes a considerable effort, much paperwork and many fees to meet and keep up with these requirements. We do not solicit donations in locations where we have not received written confirmation of compliance. To SEND DONATIONS or determine the status of compliance for any particular state visit https://pglaf.org While we cannot and do not solicit contributions from states where we have not met the solicitation requirements, we know of no prohibition against accepting unsolicited donations from donors in such states who approach us with offers to donate. International donations are gratefully accepted, but we cannot make any statements concerning tax treatment of donations received from outside the United States. U.S. laws alone swamp our small staff. Please check the Project Gutenberg Web pages for current donation methods and addresses. Donations are accepted in a number of other ways including including checks, online payments and credit card donations. To donate, please visit: https://pglaf.org/donate Section 5. General Information About Project Gutenberg-tm electronic works. Professor Michael S. Hart was the originator of the Project Gutenberg-tm concept of a library of electronic works that could be freely shared with anyone. For thirty years, he produced and distributed Project Gutenberg-tm eBooks with only a loose network of volunteer support. Project Gutenberg-tm eBooks are often created from several printed editions, all of which are confirmed as Public Domain in the U.S. unless a copyright notice is included. Thus, we do not necessarily keep eBooks in compliance with any particular paper edition. Most people start at our Web site which has the main PG search facility: https://www.gutenberg.org This Web site includes information about Project Gutenberg-tm, including how to make donations to the Project Gutenberg Literary Archive Foundation, how to help produce our new eBooks, and how to subscribe to our email newsletter to hear about new eBooks.